Monday, February 1, 2010

Veritias MKII Honing Guide

I said I would post a review after I had a chance to try different blades and such in the jig. My first impressions: a well conceived and well built guide.

Veritas MKII Honing Guide


The first blade was a 3/4" chisel: easy to set up. I did not know it but I my chisels were ground at 30 degrees and not 25 as I had thought. Now I can put them back in the guide and with only a few strokes, a sharp edge appears.

The second was the Zen Toolworks plane blade. It came beveled but not honed. I flattened the back (easy as it was essentially flat to begin with), then put it in the guide and away we went. After about 5 min of working through the grits I had a honed, micro-beveled blade.

My conclusions
Pros:
I never really had a sharp edge before this. I only thought I had a sharp edge. The difference between what I could achieve freehand and with the guide is night and day. All my chisels can now pare end grain like butter. Before it was really difficult and frustrating, now it is almost a joy to see them flow through the wood.

I like that I can come back to the same settings easily and without fuss. Makes getting and maintaining an edge a much more enjoyable process.

Cons:
Holding thin chisels can be tricky (1/4"), they want to skew as they are worked on the grit. You have to be extra careful and tighten them in the guide well and be mindful on keeping the chisel straight when drawing it on the grit.

All in all I give two thumbs up. Look around for the best price. I got mine off ebay (NIB) but only saved $2 dollars or so.

Zen Toolworks Plane review

So I've had the white pine plane for a month and have properly sharpened it and used it on a couple of different woods. NICE! It is a great little plane. I have not done any shaping yet to make it fit my hand better but the way it comes is very good. The blade is fairly thick and takes and holds an edge well (at least as well as I can sharpen at the moment). I never really had great success with my bench plane (craftsman #5) so this plane was nice to use. I would highly recommend Zen Toolworks and am looking forward to getting a couple more. He has a scrub and a shoulder plane I have my eye on for the next ones.